PDA

View Full Version : NOKIA X1-01 RM-713 tiếng việt ok by atf



ali tran
21-07-2012, 09:21 PM
chưa thấy ai post lên nay làm chuột bạch ok post lên cho ae thêm thông tin
flash tiếng việt ok X1-01 2sim 2 sóng online by ATF BIG THANKS ĐẾN MOD NTC_MOBILE
FILES ae down bên này: http://www.mediafire.com/?kwmbwfeanhhyc2h
chạy bằng cáp đa năng ,pin out giống 1202


VBATT OFF...
VBATT ON
Setting VBATT Done!...

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

************************************************** ****
TIME STARTS HERE
************************************************** ****


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...

Flash Chip Manufacturer: Samsung Electronics Corp.
Flash Chip Type: K8S6415ETC 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v

Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-713\rm713_005.290

FIRMWARE Image Found...
Number of Sections: 03
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 03
FIRMWARE Erase Block: 0x00000000~0x0001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 24576 bytes
Data Checksum: 55FD
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 03
FIRMWARE Erase Block: 0x00800000~0x00BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 4128768 bytes
Data Checksum: 0D04
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 03
FIRMWARE Erase Block: 0x00C5D000~0x00E5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1697536 bytes
Data Checksum: CC08
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-713\rm713_005.29mr

PPM Image Found...
Number of Sections: 01
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x00100000~0x0061113E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 5312832 bytes
Data Checksum: 22BD
Uploading Data Blocks to phone...
PPM Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-713\rm7130_nai05.29mr

CONTENT Image Found...
Number of Sections: 01
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x00E60000~0x00F0DF7E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 712576 bytes
Data Checksum: A1C9
Uploading Data Blocks to phone...
CONTENT Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Exit Flash Mode Done...
Time Elapse : 00:04:52

************************************************** ****
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
************************************************** ****


Waiting For Phone to go Online...

5, 4, 3, 2, 1...
MCU: V 05.29 10-06-11 RM-713 (c) Nokia
IMEI: 357893043850822
Product Serial Number: 26CC22AAH
Product Code : 059D900
Module Code : 0204727
Basic Production Code: 059K2G8
MCU SW Version : V 05.29 10-06-11 RM-713 (c) Nokia MR
ADSP Version : p V 05.29\n10-06-11\nRM-713\n(c) NMP\nmr
PPM Version : V 05.29 10-06-11 RM-713 (c) Nokia
HW Version : 1000
UEM Version : 1328
UPP Version : 8850
LCD Version : TPO:BARACOAv82 HX5081
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000030002
Asic : 11
Provider : Default Test Operator

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : PASSED



FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK